代码之家  ›  专栏  ›  技术社区  ›  code-8

Fail2Ban通过cURL发帖

fail2ban request post curl http
  •  0
  • code-8  · 技术社区  · 7 年前

    我在我的Ubuntu虚拟机上安装了Fail2Ban。 我成功地配置了,并且在检测到禁令时收到了电子邮件。

    是否可以将Fail2Ban配置为在发送邮件后触发curl POST请求?

    Fail2Ban允许这样的事情发生吗?

    猫监狱.conf 

    # Fail2Ban configuration file.
#
# This file was composed for Debian systems from the original one
# provided now under /usr/share/doc/fail2ban/examples/jail.conf
# for additional examples.
#
# Comments: use '#' for comment lines and ';' for inline comments
#
# To avoid merges during upgrades DO NOT MODIFY THIS FILE
# and rather provide your changes in /etc/fail2ban/jail.local
#

# The DEFAULT allows a global definition of the options. They can be overridden
# in each jail afterwards.

[DEFAULT]

# "ignoreip" can be an IP address, a CIDR mask or a DNS host. Fail2ban will not
# ban a host which matches an address in this list. Several addresses can be
# defined using space separator.
ignoreip = 127.0.0.1/8

# "bantime" is the number of seconds that a host is banned.
bantime  = 600

# A host is banned if it has generated "maxretry" during the last "findtime"
# seconds.
findtime = 600
maxretry = 3

# "backend" specifies the backend used to get files modification.
# Available options are "pyinotify", "gamin", "polling" and "auto".
# This option can be overridden in each jail as well.
#
# pyinotify: requires pyinotify (a file alteration monitor) to be installed.
#            If pyinotify is not installed, Fail2ban will use auto.
# gamin:     requires Gamin (a file alteration monitor) to be installed.
#            If Gamin is not installed, Fail2ban will use auto.
# polling:   uses a polling algorithm which does not require external libraries.
# auto:      will try to use the following backends, in order:
#            pyinotify, gamin, polling.
backend = auto

# "usedns" specifies if jails should trust hostnames in logs,
#   warn when reverse DNS lookups are performed, or ignore all hostnames in logs
#
# yes:   if a hostname is encountered, a reverse DNS lookup will be performed.
# warn:  if a hostname is encountered, a reverse DNS lookup will be performed,
#        but it will be logged as a warning.
# no:    if a hostname is encountered, will not be used for banning,
#        but it will be logged as info.
usedns = warn

#
# Destination email address used solely for the interpolations in
# jail.{conf,local} configuration files.
destemail = rajacse10@gmail.com

#
# Name of the sender for mta actions
sendername = Fail2Ban

#
# ACTIONS
#

# Default banning action (e.g. iptables, iptables-new,
# iptables-multiport, shorewall, etc) It is used to define
# action_* variables. Can be overridden globally or per
# section within jail.local file
banaction = iptables-multiport

# email action. Since 0.8.1 upstream fail2ban uses sendmail
# MTA for the mailing. Change mta configuration parameter to mail
# if you want to revert to conventional 'mail'.
mta = sendmail

# Default protocol
protocol = tcp

# Specify chain where jumps would need to be added in iptables-* actions
chain = INPUT

#
# Action shortcuts. To be used to define action parameter

# The simplest action to take: ban only
action_ = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]

# ban & send an e-mail with whois report to the destemail.
action_mw = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
              %(mta)s-whois[name=%(__name__)s, dest="%(destemail)s", protocol="%(protocol)s", chain="%(chain)s", sendername="%(sendername)s"]

# ban & send an e-mail with whois report and relevant log lines
# to the destemail.
action_mwl = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
               %(mta)s-whois-lines[name=%(__name__)s, dest="%(destemail)s", logpath=%(logpath)s, chain="%(chain)s", sendername="%(sendername)s"]

# Choose default action.  To change, just override value of 'action' with the
# interpolation to the chosen action shortcut (e.g.  action_mw, action_mwl, etc) in jail.local
# globally (section [DEFAULT]) or per specific section
action = %(action_mwl)s

#
# JAILS
#

# Next jails corresponds to the standard configuration in Fail2ban 0.6 which
# was shipped in Debian. Enable any defined here jail by including
#
# [SECTION_NAME]
# enabled = true

#
# in /etc/fail2ban/jail.local.
#
# Optionally you may override any other parameter (e.g. banaction,
# action, port, logpath, etc) in that section within jail.local

[ssh]

enabled  = true
port     = ssh
filter   = sshd
logpath  = /var/log/auth.log
maxretry = 6

[dropbear]

enabled  = false
port     = ssh
filter   = dropbear
logpath  = /var/log/auth.log
maxretry = 6

# Generic filter for pam. Has to be used with action which bans all ports
# such as iptables-allports, shorewall
[pam-generic]

enabled  = false
# pam-generic filter can be customized to monitor specific subset of 'tty's
filter   = pam-generic
# port actually must be irrelevant but lets leave it all for some possible uses
port     = all
banaction = iptables-allports
port     = anyport
logpath  = /var/log/auth.log
maxretry = 6

[xinetd-fail]

enabled   = false
filter    = xinetd-fail
port      = all
banaction = iptables-multiport-log
logpath   = /var/log/daemon.log
maxretry  = 2


[ssh-ddos]

enabled  = false
port     = ssh
filter   = sshd-ddos
logpath  = /var/log/auth.log
maxretry = 6


# Here we use blackhole routes for not requiring any additional kernel support
# to store large volumes of banned IPs

[ssh-route]

enabled = false
filter = sshd
action = route
logpath = /var/log/sshd.log
maxretry = 6

# Here we use a combination of Netfilter/Iptables and IPsets
# for storing large volumes of banned IPs
#
# IPset comes in two versions. See ipset -V for which one to use
# requires the ipset package and kernel support.
[ssh-iptables-ipset4]

enabled  = false
port     = ssh
filter   = sshd
banaction = iptables-ipset-proto4
logpath  = /var/log/sshd.log
maxretry = 6

[ssh-iptables-ipset6]

enabled  = false
port     = ssh
filter   = sshd
banaction = iptables-ipset-proto6
logpath  = /var/log/sshd.log
maxretry = 6


#
# HTTP servers
#

[apache]

enabled  = false
port     = http,https
filter   = apache-auth
logpath  = /var/log/apache*/*error.log
maxretry = 6

# default action is now multiport, so apache-multiport jail was left
# for compatibility with previous (<0.7.6-2) releases
[apache-multiport]

enabled   = false
port      = http,https
filter    = apache-auth
logpath   = /var/log/apache*/*error.log
maxretry  = 6

[apache-noscript]

enabled  = false
port     = http,https
filter   = apache-noscript
logpath  = /var/log/apache*/*error.log
maxretry = 6

[apache-overflows]

enabled  = false
port     = http,https
filter   = apache-overflows
logpath  = /var/log/apache*/*error.log
maxretry = 2

# Ban attackers that try to use PHP's URL-fopen() functionality
# through GET/POST variables. - Experimental, with more than a year
# of usage in production environments.

[php-url-fopen]

enabled = false
port    = http,https
filter  = php-url-fopen
logpath = /var/www/*/logs/access_log

# A simple PHP-fastcgi jail which works with lighttpd.
# If you run a lighttpd server, then you probably will
# find these kinds of messages in your error_log:
#   ALERT – tried to register forbidden variable ‘GLOBALS’
#   through GET variables (attacker '1.2.3.4', file '/var/www/default/htdocs/index.php')

[lighttpd-fastcgi]

enabled = false
port    = http,https
filter  = lighttpd-fastcgi
logpath = /var/log/lighttpd/error.log

# Same as above for mod_auth
# It catches wrong authentifications

[lighttpd-auth]

enabled = false
port    = http,https
filter  = suhosin
logpath = /var/log/lighttpd/error.log

[nginx-http-auth]

enabled = false
filter  = nginx-http-auth
port    = http,https
logpath = /var/log/nginx/error.log

# Monitor roundcube server

[roundcube-auth]

enabled  = false
filter   = roundcube-auth
port     = http,https
logpath  = /var/log/roundcube/userlogins


[sogo-auth]

enabled  = false
filter   = sogo-auth
port     = http, https
# without proxy this would be:
# port    = 20000
logpath  = /var/log/sogo/sogo.log


#
# FTP servers
#

[vsftpd]

enabled  = false
port     = ftp,ftp-data,ftps,ftps-data
filter   = vsftpd
logpath  = /var/log/vsftpd.log
# or overwrite it in jails.local to be
# logpath = /var/log/auth.log
# if you want to rely on PAM failed login attempts
# vsftpd's failregex should match both of those formats
maxretry = 6


[proftpd]

enabled  = false
port     = ftp,ftp-data,ftps,ftps-data
filter   = proftpd
logpath  = /var/log/proftpd/proftpd.log
maxretry = 6


[pure-ftpd]

enabled  = false
port     = ftp,ftp-data,ftps,ftps-data
filter   = pure-ftpd
logpath  = /var/log/syslog
maxretry = 6


[wuftpd]

enabled  = false
port     = ftp,ftp-data,ftps,ftps-data
filter   = wuftpd
logpath  = /var/log/syslog
maxretry = 6


#
# Mail servers
#

[postfix]

enabled  = false
port     = smtp,ssmtp,submission
filter   = postfix
logpath  = /var/log/mail.log


[couriersmtp]

enabled  = false
port     = smtp,ssmtp,submission
filter   = couriersmtp
logpath  = /var/log/mail.log


#
# Mail servers authenticators: might be used for smtp,ftp,imap servers, so
# all relevant ports get banned
#

[courierauth]

enabled  = false
port     = smtp,ssmtp,submission,imap2,imap3,imaps,pop3,pop3s
filter   = courierlogin
logpath  = /var/log/mail.log


[sasl]

enabled  = false
port     = smtp,ssmtp,submission,imap2,imap3,imaps,pop3,pop3s
filter   = postfix-sasl
# You might consider monitoring /var/log/mail.warn instead if you are
# running postfix since it would provide the same log lines at the
# "warn" level but overall at the smaller filesize.
logpath  = /var/log/mail.log

[dovecot]

enabled = false
port    = smtp,ssmtp,submission,imap2,imap3,imaps,pop3,pop3s
filter  = dovecot
logpath = /var/log/mail.log

# To log wrong MySQL access attempts add to /etc/my.cnf:
# log-error=/var/log/mysqld.log
# log-warning = 2
[mysqld-auth]

enabled  = false
filter   = mysqld-auth
port     = 3306
logpath  = /var/log/mysqld.log


# DNS Servers


# These jails block attacks against named (bind9). By default, logging is off
# with bind9 installation. You will need something like this:
#
# logging {
#     channel security_file {
#         file "/var/log/named/security.log" versions 3 size 30m;
#         severity dynamic;
#         print-time yes;
#     };
#     category security {
#         security_file;
#     };
# };
#
# in your named.conf to provide proper logging

# !!! WARNING !!!
#   Since UDP is connection-less protocol, spoofing of IP and imitation
#   of illegal actions is way too simple.  Thus enabling of this filter
#   might provide an easy way for implementing a DoS against a chosen
#   victim. See
#    http://nion.modprobe.de/blog/archives/690-fail2ban-+-dns-fail.html
#   Please DO NOT USE this jail unless you know what you are doing.
#[named-refused-udp]
#
#enabled  = false
#port     = domain,953
#protocol = udp
#filter   = named-refused
#logpath  = /var/log/named/security.log

[named-refused-tcp]

enabled  = false
port     = domain,953
protocol = tcp
filter   = named-refused
logpath  = /var/log/named/security.log

# Multiple jails, 1 per protocol, are necessary ATM:
# see https://github.com/fail2ban/fail2ban/issues/37
[asterisk-tcp]

enabled  = false
filter   = asterisk
port     = 5060,5061
protocol = tcp
logpath  = /var/log/asterisk/messages

[asterisk-udp]

enabled  = false
filter   = asterisk
port     = 5060,5061
protocol = udp
logpath  = /var/log/asterisk/messages


# Jail for more extended banning of persistent abusers
# !!! WARNING !!!
#   Make sure that your loglevel specified in fail2ban.conf/.local
#   is not at DEBUG level -- which might then cause fail2ban to fall into
#   an infinite loop constantly feeding itself with non-informative lines
[recidive]

enabled  = false
filter   = recidive
logpath  = /var/log/fail2ban.log
action   = iptables-allports[name=recidive]
           sendmail-whois-lines[name=recidive, logpath=/var/log/fail2ban.log]
bantime  = 604800  ; 1 week
findtime = 86400   ; 1 day
maxretry = 5
    0 回复  |  直到 7 年前
        1
  •  2
  •   tukan    7 年前

    对于自定义操作,您需要在 /etc/fail2ban/action.d/<your_config_file>.conf (或 .local )

    必须有这样的结构: 

    [Definition]

# Option:  actionstart
# Notes.:  command executed once at the start of Fail2Ban.
# Values:  CMD
#
actionstart = 

# Option:  actionstop
# Notes.:  command executed once at the end of Fail2Ban
# Values:  CMD
#
actionstop = 

# Option:  actioncheck
# Notes.:  command executed once before each actionban command
# Values:  CMD
#
actioncheck =

# Option:  actionban
# Notes.:  command executed when banning an IP. Take care that the
#          command is executed with Fail2Ban user rights.
# Tags:    <ip>  IP address
#          <failures>  number of failures
#          <time>  unix timestamp of the ban time
# Values:  CMD
#
actionban =

# Option:  actionunban
# Notes.:  command executed when unbanning an IP. Take care that the
#          command is executed with Fail2Ban user rights.
# Tags:    <ip>  IP address
#          <failures>  number of failures
#          <time>  unix timestamp of the ban time
# Values:  CMD
#
actionunban =

    curlAction.conf(删除注释以节省一些空间)(可以是 curlAction.local 如果 .conf 已定义) 

    [Definition]
actionstart =
actionstop = 
actioncheck = 
actionban = curl -d '{"ip":"<ip>"}' -H "Content-Type: application/json" -X POST http://localhost:3000/data
actionunban =

    下一个通过复制配置Fail2ban jail.conf 到 jail.local 并添加需要覆盖的内容(有关区别,请参见 serverfault answer -简而言之 .形态 先加载然后 .本地 超载)

    你应该说出 curlAction.conf 那么你需要加入 /etc/fail2ban/jail.local 在 [ssh] 截面组件 action 指令a curlAction 例如,它可能是这样的: 

    [ssh]

enabled  = true
port     = ssh
filter   = sshd
action   = curlAction
logpath  = /var/log/auth.log
maxretry = 6

    使用的文档: fail2ban-sms github存储库和 manual .

    推荐文章
    Amit Kothari  ·  对于ALB-是否存在fail2ban的等效项?
    8 年前
    Florian  ·  使用子流程输出中的列表
    9 年前
    关于   移动版
    代码之家 - 一站式码农服务社区
    沪ICP备11025650号