Symbian中的二进制短信

我想知道是否有人已经成功地创建了用于发送二进制消息的工作代码(用于配置Symbian手机)以及一些二进制数据样本。 到目前为止,我发现的所有样品都没有离开发件箱或从未返回。

// Current entry is the Draft folder.
    iSmsMtm->SwitchCurrentEntryL( KMsvDraftEntryId );
    // Create a new SMS message entry as a child of the current context.
    iSmsMtm->CreateMessageL( KUidMsgTypeSMS.iUid );
    CMsvEntry& serverEntry = iSmsMtm->Entry();
    TMsvEntry entry( serverEntry.Entry() );

    /* Send Binary SMS */
    CSmsHeader &hdr = iSmsMtm->SmsHeader(); 
    CSmsMessage &msg = hdr.Message(); 
    CSmsPDU &pdu = msg.SmsPDU(); 
    CSmsUserData &userdata = pdu.UserData(); 

    // Set the DCS byte
    pdu.SetBits7To4(TSmsDataCodingScheme::ESmsDCSTextUncompressedWithNoClassInfo);
    pdu.SetAlphabet(TSmsDataCodingScheme::ESmsAlphabet8Bit);
    pdu.SetClass(ETrue, TSmsDataCodingScheme::ESmsClass2);

    char buf[]= {...}; //my binary data, 247 bytes long

    // Construct a dummy message
    HBufC8 * iMessage = HBufC8::NewL(300);

    TPtr8 TempUDHBufDesc((TUint8*)buf,247,247);
    iMessage->Des().Copy(TempUDHBufDesc);
    _LOGFENTRY1(_L("mess length %d"),iMessage->Des().Length());
    userdata.SetBodyL(*iMessage); 
    delete iMessage; 

    // Message will be sent immediately.
    entry.SetSendingState( KMsvSendStateWaiting );

    entry.iDate.UniversalTime(); // insert current time //Solution for HomeTime()
    // Set the SMS message settings for the message.
    CSmsHeader& header = iSmsMtm->SmsHeader();
    CSmsSettings* settings = CSmsSettings::NewL();
    CleanupStack::PushL( settings );

    settings->CopyL( iSmsMtm->ServiceSettings() ); // restore settings
    settings->SetDelivery( ESmsDeliveryImmediately ); // to be delivered immediately
    settings->SetDeliveryReport(EFalse);
    settings->SetCharacterSet(TSmsDataCodingScheme::ESmsAlphabet8Bit); // IMPORTANT! For sending binary SMS
    header.SetSmsSettingsL( *settings ); // new settings

    // Let's check if there is a service center address.
    if ( header.Message().ServiceCenterAddress().Length() == 0 )
    {
        // No, there isn't. We assume there is at least one service center
        // number set and use the default service center number.
        CSmsSettings* serviceSettings = &( iSmsMtm->ServiceSettings() );
        // Check if number of service center addresses in the list is null.
        if ( !serviceSettings->ServiceCenterCount() )
        {        _LOGENTRY("No SC");
            return ; // quit creating the message
        }
        else
        {
            CSmsNumber* smsCenter= CSmsNumber::NewL();
            CleanupStack::PushL(smsCenter);
            smsCenter->SetAddressL((serviceSettings->GetServiceCenter( serviceSettings->DefaultServiceCenter())).Address());
            header.Message().SetServiceCenterAddressL( smsCenter->Address() );
            CleanupStack::PopAndDestroy(smsCenter);
        }
    }

    CleanupStack::PopAndDestroy( settings );

    // Recipient number is displayed also as the recipient alias.
    entry.iDetails.Set( _L("+3725038xxx") );
    iSmsMtm->AddAddresseeL( _L("+3725038xxx") , entry.iDetails );

    // Validate message.
    if ( !ValidateL() )
    {    _LOGENTRY("Not valid");
        return ;
    }

    entry.SetVisible( ETrue ); // set message as visible
    entry.SetInPreparation( EFalse ); // set together with the visibility flag
    serverEntry.ChangeL( entry ); // commit changes 
    iSmsMtm->SaveMessageL(); // save message

    TMsvSelectionOrdering selection;
    CMsvEntry* parentEntry = CMsvEntry::NewL( iSmsMtm->Session(), KMsvDraftEntryId, selection );
    CleanupStack::PushL( parentEntry );

    // Move message to Outbox.
    iOperation =parentEntry->MoveL( entry.Id(), KMsvGlobalOutBoxIndexEntryId, iStatus );

    CleanupStack::PopAndDestroy( parentEntry );

    iState = EWaitingForMoving;
    SetActive();

大多数情况下,我不确定端口和类的正确值。另外,一些正确的二进制字符串将很好地用于测试。现在我不确定代码是坏的还是数据。